UBIQUITI NanoStation Loco M5

UBIQUITI NanoStation Loco M5

Point-to-Multipoint

NanoStation Loco M5 Do you have to spend thousands of dollars just to have a very efficient and reliable wireless network? The answer is no. NanoStation Loco M5 is a great proof for that. A cost-effective solution, it performs just...

  • Category: All Products, Ubiquiti Networks, Wireless Equipments

NanoStation Loco M5

Do you have to spend thousands of dollars just to have a very efficient and reliable wireless network? The answer is no. NanoStation Loco M5 is a great proof for that. A cost-effective solution, it performs just as well as its more expensive counterparts. Plus it has a very elegant form factor that can stand up against rain, snow, and heat. It’s truly a device that doesn’t immediately wear out, a perfect option for a long-term wireless network investment.

High-performing

The NanoStation Loco M5 is known for its much smaller size than the other NanoStation, which makes it ideal for residential or small building use. It has a good throughput of around 150 mbps, sufficient to cover multitudes of devices and users simultaneously. It has a great reach at 13dBi through its integrated antenna. It operates at a frequency of GHz, which is ideal if you want to maximize throughput. This signal is seldom interrupted by noise or clutter as most devices and appliances work on 2.4GHz frequency.

AirMax

The unit also makes use of the AirMax technology and its TDMA protocol. It lets you compartmentalize time schedules so you’ll be able to enjoy a smoother transmission and receipt of wireless connection. Moreover, you are also able to reduce latency, even if there are already a lot of devices that are connected into the network. It works very well along with quality of service so you can prioritize the allocation of the available bandwidth.

NanoStation Loco M5 can be controlled via the software AirOS and AirController. It’s a web-based management interface.

PoE

The NanoStation Loco M5 is also compatible with a PoE (power over Ethernet setup) so you can deal with fewer wires. Moreover, you can now reset its power directly from the main source than on the equipment itself, saving you the hassle.

SPECIFICATION
Processor Specs: Atheros MIPS 24KC, 400 MHz
Memory: 32 MB SDRAM, 8 MB Flash
Networking Interface: 1x 10/100 Ethernet Port
Operating Frequency: 5170-5875 MHz
Operation mode: AP, Client, WDS
Encryption: WEP 64/128/152, WPA, WPA2, 802.1X
Wireless transmission speed: up to 300 Mbps
Standards: 802.11a/n
Gain: 13 dBi
Polarization: Dual Linear
Max. Power Consumption: 5.5 W
Max.output power: 23 dBm
Sensitivity: -83 dBm
Dimensions: 163x31x80 mm
Weight: 0.18 kg
Power Supply (PoE): 24V, 0.5A
Power Method: Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)
Enclosure Characteristics: Outdoor UV Stabilized Plastic
Mounting: Pole Mounting Kit Included
Operating Temperature: -30 ‒ 75° C
Operating Humidity: 5 - 95%
Supported OS: AirOS
Default IP: 192.168.1.20
Default name: ubnt
Default password: ubnt