Nera Satlink 4033 Integrated 2W Ku-Band Transceiver

Nera Satlink 4033 Integrated 2W Ku-Band Transceiver

Transceivers

The SatLink 4033/4035 is the first DVB-RCS certified outdoor unit to fully integrate a Ku-band transmitter and receiver into a single compact, lightweight casing. It is available in both 2 Watt (4033) and 3 watt (4035) versions, and is compatible...

USD 50.00
  • Category: All Products, Block Upconverter BUC, CLEARANCE STOCK, Ku-Band Block Upconverter BUC

The SatLink 4033/4035 is the first DVB-RCS certified outdoor unit to fully integrate a Ku-band transmitter and receiver into a single compact, lightweight casing. It is available in both 2 Watt (4033) and 3 watt (4035) versions, and is compatible with most VSAT antennas. When combined with the standard DiSEqCTM power control feature on the transmitter, the result is a significant reduction in installation time. The SatLink 4033/4035 is a member of a family of SatLink products and systems from STM enabling scalable, high-availability DVB-RCS networks optimized for Internet Protocol (IP) communications, including: VSATs, turnkey hub and gateway systems, hub components, and value-added options for advanced data, voice and video networking via satellite. STM is the technology and market leader in DVB-RCS satellite networks delivering superior performance for telecom service providers, ISPs, governments and enterprises around the world. STM also offers teleport services, installation and integration services, plus total managed network services.

Transmitter 

RF Interface

Frequency:  14.0 - 14.5 GHz

P1dB Compression: 33 dBm (4033) / 35 dBm (4035)

 

IF Interface

Frequency:  950 - 1450 MHz Connector:  F-type, 75 Ohms DC Supply:  18-28 VDC

Power Consumption: < 20 Watt

 

Local Oscillator

Frequency:  13.05 GHz, locked to ext. ref.

Reference Frequency: 10 MHz (fed via Tx connector)

Reference Level : -5 to +5 dBm

SSB Phase Noise: 1 kHz : -70 dBc/Hz; 10 kHz :  -80 dBc/ Hz; 100 kHz :  -93 dBc/Hz; 1 MHz : -117 dBc/Hz

 

Gain & Spurious

Linear Gain:  57 dB typical

Gain Ripple - 500 MHz: 4 dB typical Gain Ripple - 50 MHz: 1.5 dB typical Temperature Stability: 3 dB

Spurious in Tx Band: -50 dBc

 

Control Channel

Extended DiSEqC v. 4.2

22 kHz two-way signaling downstream channel

 

  Antenna Interface

 

Polarization:  Linear / Linear, Cross-polar

Feed-horn Interface: C120

Tx/Rx Cross-polar Level: 35 dB / 35 dB

 

Receiver

RF Interface

Frequency:  10.7 - 12.75 GHz

Noise Figure at OMT: 1.0 dB typical

Conversion Gain: 58 - 68 dB

 

IF Interface

Frequency:  950 - 2150 MHz Connector:  F-type, 75 Ohms Output Level, P1dB: +5 dBm DC Supply:  13 - 18 VDC

Current Drain:  120 mA Maximum

Band Selection (Lo/Hi): 22 kHz Tone (Off/On)

 

Local Oscillator

Frequency:  9.75 GHz (Lo band); 10.6 GHz (Hi band) SSB Phase Noise: 10 kHz : -85 dBc/Hz; 100 kHz : -105 dBc/Hz; 1 MHz : -120 dBc/Hz

L.O. Stability:  +/- 1 MHz

 

Physical/Environmental

 

Temperature:  -35°C to +55°C (operating); -35°C to

+80°C (storage)

Humidity:  0 to 100 % condensing (operating); 0 to 100

% non-condensing (storage)

IP Grade: IP 64

Size: 21.1 x 14.1 x 4.4 cm

  Weight:  1.2 kg

 

Compliance

 

Regulatory:  CE (R&TTE), Anatel