IDirect

iDirect EVOLUTION X7 Satellite Remote Router Modem

iDirect EVOLUTION X7 Satellite Remote Router Modem

BUC Power Supply
Request for a quote

IDIRECT X7 FEATURES

  • Up to 100 Mbps of combined inbound and outbound throughput
  • 1 RU high remote chassis fitting in standard telecom racks
  • Licensable 2nd demodulator for multicast traffic
  • Variant power supply module configurations
  • Dual image support and Web iSite for ease of deployment and upgrades
  • Communications-on-the-Move (COTM) support
  • AES Encryption

IDIRECT X7 SATELLITE ROUTER

The Evolution X7 remote is the first of iDirect’s next-generation family of remotes. Built on an entirely new multi-core hardware system, the X7 is optimized to deliver best-in-class DVB-S2/ACM and A-TDMA throughput performance. The X7 also features SCPC on the return and an 8-port embedded switch for managing multiple user groups. The rack-mountable remote comes with multiple choices of embedded power supply units and dual DVB-S2 demodulators with fully independent RF chains. This makes it uniquely suited for a range of enterprise voice and data services while simultaneously receiving multicast channels over the same or a second transponder or satellite – even combining spot-beam HTS capacity and Ku- and C-Band capacity.


Network Configuration

Network Topology Star
Downstream DVB-S2 Upstream TDMA
Modulation QPSK, 8PSK, 16APSK BPSK, QPSK, 8PSK
FEC LDPC, 1/4 - 8/9 2D 16-State, 1/2 - 6/7
Max. Symbol Rate 1 - 45 Msps 128 ksps - 7.5 Msps
Max. Info Rate 149.7 Mbps 19.2 Mbps
Max. IP Data Rate 59.2 Mbps 16 Mbps
Spread Spectrum
(Max Rate Mcps)
Up to 7.5 Mcps
Spreading Factors: 2, 4, 8
Max rates are achieved under optimal conditions.

Interfaces

Satcom Interfaces
TxIF Type-F, 950 – 1700MHz,
Composite Power +3dBm / -35dBm
Rx1/Rx2 IF Type-F, 950 – 2150MHz,
, -5dBm (max) composite /
-130+10*Log10(Sym rate) dBm
(min) single carrier
Available BUC Power (IFL) +24V, 118W max available @ connector
+48V, 158W max available @ connector (optional)
Available LNB Power (IFL) +19V (Nominal), 22KHz DiSEqC tone
Rx1/Rx2 In: 13-18V @ 0.5A
Data Interfaces LAN: 8-port ethernet switch, 10/100, 802.1q VLAN
RS-232: RJ45 (Console connection),
RS-422: RJ45 BUC I/O port (future release)
Security AES Link Encryption (256-bit) (optional)
Protocols Supported TCP, UDP, ACL, ICMP, IGMP, RIP Ver2,
Static Routes, NAT, DHCP, DHCP Helper,
Local DNS Caching, OpenAMIP, cRTP and GRE
Traffic Engineering Group QoS, QoS 
(Priority Queuing and CBWFQ),
Strict Priority Queuing,
Application Based QoS,
Minimum CIR, CIR 
(Static and Dynamic),
Rate Limiting
Other Features Transmit Key Line*

Mechanical / Environmental

Size (W x D x H) W 17.5 in (44.5 cm) x D 12 in (30.5 cm) x H 1.75 in (4.45 cm)
Weight 10 lbs (4.54 kg)
Operating Temperature 0° to +50°C (32° to +122°F) at Sea Level
with temperature gradient of 1°C per 1 min
Humidity Max 90% non-condensing humidity
Input Voltage 100–240 VAC, Auto-Ranging; ±36-76VDC
(±48 VDC nominal) (optional)
Radio Standards
    EN 301-428 v1.3.1
    EN 301-443 v1.3.1
   EN 301-459 v1.4.1

Ku-Band System Level Specification
C-Band System Level Specification
Ka-Band System Level Specification
Safety Standards Complies with IEC 60950,
EN 60950-1, UL 60950-1, CSA C22.2 No.60950-1-03
Emission Standard Complies with EN 55022 Class B,
FCC Part 15 Class B, CISPR 22 Class B,
EN 61000-3-2, EN 61000-3-3
EMC/Immunity Standard Complies with EN 55024, EN 301-489-1,
EN 301-489-12, EN 61000-4-2, EN 61000-4-3,
EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 
61000-4-11
Certification FCC, CE, and RoHS Compliant
View full details