Emitor
Emitor Satlook Color HD DVB-S/S2 Spectrum Analyzer
Emitor Satlook Color HD DVB-S/S2 Spectrum Analyzer
Couldn't load pickup availability
The SAT- part presents, under one of the sub menus, digital information like BER (bit error rate), constellation-diagram (QPSK and 8PSK) and S/N (signal/noise ratio). The NIT function of the SAT-part can identify the various TV-satellites by reading out the NIT in the Bitstream (NIT = Network Information Table). The NIT also contains info about the transponders TV and Radio-channels. The unit has a built in DVB S-receiver which can store up to 100 Free To Air channels in a favourite channel-list. SATLOOK HD COLOR can handle a lot of memory-positions and both spectrum-pictures and certain frequencies can be saved (both analog and digital transponders). The power of the instrument is supplied by a built in and rechargeable battery. The instrument is provided with a 5” color 16:9 LCD-monitor. Menus/help-displays are shown on the LCDscreen (64x128) beside the monitor.
FEATURES
- Spectrum-analyzer 950-2150MHz.DVB/S S/2 -receiver 920-2150MHz.Super bright 5” 16:9 TFT-LCD color display.Automatic Satellite identification.Readout of NIT - gives SAT ID and TV/Radio-channel info.Digital BER and S/N-ratio (DVB-S, S/2). QPSK and 8PSK constellation diagram.DVB-S (Free to Air) and SAT-analog TV-picture.LNB voltage 13/18V, 22KHz tone switch.DiSEqC according to level 1.0, 1.1 and 1.2.SatCr-control (UniCable).Favourite channel list (100 channels) for FTA DVB-S.Lots of memory positions for spectrum pictures.RS232 for PC-connection (up/download).Rechargeable Li-Ion battery.Nice & small, only 3Kg complete with carrying case
- Spectrum-analyzer 950-2150MHz.
- DVB/S S/2 -receiver 920-2150MHz.
- Super bright 5” 16:9 TFT-LCD color display.
- Automatic Satellite identification.
- Readout of NIT - gives SAT ID and TV/Radio-channel info.
- Digital BER and S/N-ratio (DVB-S, S/2).
- QPSK and 8PSK constellation diagram.
- DVB-S (Free to Air) and SAT-analog TV-picture.
- LNB voltage 13/18V, 22KHz tone switch.
- DiSEqC according to level 1.0, 1.1 and 1.2.
- SatCr-control (UniCable).
- Favourite channel list (100 channels) for FTA DVB-S.
- Lots of memory positions for spectrum pictures.
- RS232 for PC-connection (up/download).
- Rechargeable Li-Ion battery.
- Nice & small, only 3Kg complete with carrying case
Input frequency: |
920-2150MHz. |
Sat-TV min level in: |
About 35 dBuV (noise). |
Sat-TV max level in: |
About 90 dBuV. |
Sat-TV attenuation: |
15 dB attenuator on/off. |
Display of signallevel (analog): |
dB on LCD/monitor. Pitch-tone. |
Sat-TV accuracy: |
±1½ dB (at +20° C). |
DVB-S S/2 Digital display of signallevel: |
S/N (signal/noise-ratio) BER (bit error rate) Constellation (QPSK and 8PSK). |
Satellite-indentification: |
Yes, by reading out the NIT in the Bitstream. Info about the TV and Radio channels. |
TV standard: |
Multi TV/ (PAL, NTSC, SECAM). |
KU- C-band: |
Yes, selectable. |
Input impedance: |
75 Ohm, BNC-con. |
Picture-screen: |
5” 16:9 TFT-LCD monitor |
Menus: |
On LCD 64x128. |
Memory: |
- Lots of spectrum pictures can be stored with name. Stored spectrum can be mixed for easy identification of satellite. -“Maxhold”-function. |
Favouritechannels: |
Both analog and digital frequencies can be stored (with name). 100 DVB-S Free to Air channels can be stored in a favourite channel-list. |
PC-connection: |
RS232-output and PC-software. |
Sat-TV power out: |
Yes, 13-18V. |
Sat-TV control: |
22 kHz, DiSEqC SatCr (UniCable). |
DiSEqC: |
Yes, all 1.0 and 1.1. 1.2, Toneburst on/off. |
DiSEqC actuator: |
Built in positioner for DiSEqC 1.2, |
Battery: |
Rechargable 12v, 3.5 amp/hour. |
Weight: |
About 4 kg incl. battery. |
Accessories: |
Nylon carrying-case. Car-charger, |
Share
