VSATplus International Inc.

News » Newtec

  • Newtec MDM2210 IP Satellite Modem

    Posted on by VSATplus Shop

    Newtec MDM2210 IP Satellite Modem

    KEY FEATURES

    • Small size, table top or wall mounted 
    • DVB-S2 ACM Forward
    • 4CPM MF-TDMA Adaptive Return Link
    • Embedded TCP acceleration and encryption
    • Multi-level Quality of Service
    • Versatile IP routing and addressing
    • Low jitter for real time applications
    • DNS Cache/Relay and HTTP pre-fetching
    • Support of IPv4 and IPv6
    • MicroSD card and USB interface (future use)
    • Over-the-air software upgradeability
    • Over-the-air monitoring and diagnostics tools

    Trump cards are its easy installation and efficient modulation techniques enabling network operators to offer IP broadband services in a cost effective way.

    Main advantages
    • Low initial investment per user, thanks to a very low terminal cost and unique Point & Play easy - installation capability
    • Easy to use web GUI for installation, diagnostics and troubleshooting
    • Adaptive Return Link based on different 4CPM modulations/coding and multiple channel bandwidths.
    • High service satisfaction ensured through true broadband experience
    • Optimal availability and efficiency of DVB-S2 transmission thanks to Newtec’s technologies FlexACM® and ThiMM
    • Efficiency improvement of 10 to 15% with Newtec’s Clean Channel Technology®

    •   Max RX rate UDP             up to 20 Mbps total (unicast or multicast)

    •   Max TX rate TCP               up to 3.5 Mbps

    •   Max TX rate UDP              up to 3.5 Mbps

    Modem Interfaces

    RF INPUT/OUTPUT:

    •   Connector:                     Two F

    •   Impedance:                  75 Ohm

    •   RF in Frequency:                950 – 2100MHz (L-band)

    •   Rx Level:                        -65 to -25dBm

    •   RF out Frequency:             2750 – 3000MHz

    •   Tx Level:                           0 dBm

    LOCAL AREA CONNECTION     1 x 10/100 TX (RJ-45)

    USB                                       USB 2.0 (future use)

    MASS STORAGE                      MicroSD card (future use)

    Mechanical & Environment

    •  Housing                      170x150x32mm

    •   Weight                          450 g

    •  Operating temperature  0 to 40°C

    •   Humidity                       5% - 95% non-condensing

    Power supply

    •   DC Power supply             18V or 24V (depending on iLNB)

    •  Mains adaptor input      mains AC, 50Hz\210-260V and 60Hz\100-130V

    •   Power consumption         <30 Watt (0.8W Ku iLNB), <60 Watt (2W iLNB)

    IP features

    •  Protocols:       UDP, IPv4 & IPv6, ICMP, IGMPv2, TCP, ARP, DHCP, DNS, DiffServ Marking

    Management Interfaces

    •  Web GUI

    •  Over-the-air software & configuration updates

    • Over-the-air monitoring, self-test and diagnostics

    Software release

    • Specifications valid for Sat3Play© software release 2.2

    Standards

    •  EN 302307     DVB-S2

    •  EN 301428   Ku-band VSAT spectrum usage

    •  EN 301459   Ka-band VSAT spectrum usage

    •  IEEE 802.3    10T Ethernet

    •  IEEE 802.3u  100TX Ethernet

    Satellite Link Interface

    FORWARD CARRIER (RX)

    • Standard                   DVB-S2 ACM
    • Modulation                  QPSK, 8PSK, 16APSK, 32APSK

    •   Coding                  1/4, 1/3, 2/5, 1/2,3/5, 2/3,3/4,4/5, 5/6, 8/9, 9/10 

    •   Roll-off                     5, 10, 15, 20, 25 and 35 %

    • Symbol rate             3.6 - 63 Mbaud (up to 47Mbaud for 16APSK, up to 38Mbaud for 32APSK with 5/6)

    RETURN CARRIER (TX)

    • Modulation             4CPM (Quaternary Continuous Phase Modulation) with 6 different modcods, with Adaptive Return Link
    • Access Scheme         Multi Frequency TDMA (Timed Division Multiple Access)

    Channel bandwidth 128kHz to 4MHz

     Newtec MDM2210 on the Newtec Dialog Platform

    Read more